Rosewill Flat Panel Television R800N User Guide

TFT-LCD COLOR MONITOR  
USER’s MANUAL  
R800N  
 
Introduction  
Product Description  
Congratulations on your purchasing this new generation of monitor.  
Your LCD monitor incorporates high quality display into a small light  
weighted module. It has power-saving capabilities and emits no X-ray  
radiation. You will certainly benefit from this monitor in lots of way to  
name some of them, comfort safety and environmental protection.  
This LCD monitor incorporates 18 color active matrix thin-film-  
transistor (TFT) liquid crystal display to provide superior display per-  
formance. A maximum resolution of XGA 1024X768 is ideal for  
designs that enhance this LCD monitor s performance are Plug & play  
compatibility, audio system and OSD (On Screen Display) controls.  
Package Contents  
Included with your LCD monitor are following items:  
18 TFT LCD monitor  
15pin D-sub signal cable  
AC power cable  
User s manual  
Sound Card Cable (Option)  
,
Product Features  
High contrast color TFT LCD display support resolution up to XGA  
1024X768  
Compatible with IBM VGA, VESA, and Macintosh standards.  
Imbedded audio system provides sound performance. (Option)  
AV-IN and S-video use.(option)  
AUDIO-1, and PC line in sound application. (Option)  
2
 
Cleaning  
Gently wipe screen with a clean camel hair lens brush, or a soft, clean,  
lint-free cloth.  
This removes dust and other articles that can scratch the screen,  
Do not apply pressure to the screen surface when wiping it clean.  
Do not pour or spray and liquid directly onto the screen or case of the  
LCD monitor.  
Chemical cleaners have been reported to damage the screen or the LCD  
monitor.  
Precautions  
Read all these instruction and save them for later use.  
Follow all warning and instructions on the product.  
Product  
Do not block the vent holes in the case.  
Do not insert sharp objects or spill liquid into the LCD monitor through  
cabinet slots.  
They may cause accident fire, electric shock or failure.  
Disconnect the power plug from the AC outlet if you will not use it  
for an indefinite period of time.  
Do not attempt to service this product yourself, as opening or removing  
covers may expose you to dangerous voltage points or other risks.  
Do not touch the screen directly with your fingers. You may damage  
the screen, and oil from your skin is difficult to be removed.  
Do not apply pressure to screen. The LCD is very delicate.  
Power  
Use the type of power indicated on the marking label.  
Plugs  
Do not remove any of the prongs of the monitors three-pronged power  
,
plug.  
Disconnect the power plug from the AC outlet under following  
conditions:  
If you will not use it for an indefinite period time.  
When the power cord or plug is damaged or frayed.  
If the product does not operate normally when the operating instructions  
aye followed.  
3
 
Adjust only those controls may result in damage and will often require  
extensive work by a qualified technician to restore the product to normal  
operation.  
If the product has been dropped or the cabinet has been damaged.  
If the product exhibits a distinct change in performance, indicating a  
need for service.  
Power and extension cords  
Do not allow anything to rest on the power cord.  
Do not locate this product where persons will walk on the cord.  
Use the proper power cord with correct attachment plug type. If the  
power source is 120V AC, use a power cord that has UL and C-UL  
approvals. If the power source is a 240V AC supply, use the tandem  
(T blade) type attachment plug with ground conductor power cord that  
meets the respective European country s safety regulations, such as  
VDE for Germany.  
,
.
Do not overload wall outlets or power cords. Ensure that the total of all  
units plugged into the wall outlet does not exceed 10 amperes.  
Ensure that the total ampere ratings on all units plugged into the  
,
extension cord is not above the cord s rating.  
If the power supply cord, which came with your monitor, is to be  
connected to the PC instead of the wall outlet, this equipment is to be  
used with UL/TUV approved computers with receptacle rated  
100~240V AC,50/60Hz,1.0A(minimum).  
Environment  
Place the monitor on a flat and leveled surface.  
Place the monitor in a will-ventilated place.  
Keep the monitor away from:  
Overly hot, cold or humid places, places directly under sunlight, dusty  
surroundings, equipment that generate strong magnetic fields.  
4
 
Control Function  
Control Button Front View  
AUTO  
9
8
7
6
5
4
3
2 1  
1. Infred receiver: Remote control to select the OSD  
of LCD Monitor and TV function.  
*
2. Power LED: This power LED indicates different status  
when this unit operates in different modes.  
3. Power switch: pressing this button turns the display  
system power on or off.  
4. Increase: This button is used to adjust the increasing  
Value of selected OSD control option and Volume  
select quickly when have Audio in function.  
5
 
5. Decrease:This button is used to adjust the decreasing Value of  
selected OSD control option and VOLUME adjust function quickly  
when have Audio function.  
6. OSD Menu/select: Pressing this button pops up the OSD menus on  
the screen and used to select the OSD control options on the screen.  
7. Auto tuning: Automatically sixes, centers and fine tunes the Video  
signal to eliminate noise and distortion.  
*8. Light sensor: Compensate light output to optimize.  
*9. Earphone: This input would offer users another better choice in using  
a monitor with disturbing other.  
*Option Item  
6
 
OSD CONTROL  
MAIN MEUN  
VGA IN : 1024x768  
H.SYNC: -48.3KHz  
V.SYNC: -60.8Hz  
ENG  
SPA  
GER  
ITA  
FRE  
CHI  
BRIGHTNESS  
CONTRAST  
DISPLAY ADJUST  
COLOR TEMPERATURE  
LANGUAGE  
MUTE  
OFF  
ON  
VOLUME  
RECALL  
RETURN  
OSD ADJUST  
AUDIO CONTROL  
RECALL  
EXIT  
DISPLAY ADJUST  
0 5 0  
0 8 0  
0 5 0  
0 5 8  
0 0 0  
OFF  
V-POSITION  
H-POSITION  
PITCH  
PHASE  
SHARPNESS  
AUTO BRIGHTNESS  
AUTO TUNING  
RECALL  
RETURN  
VIDEO ADJUST  
CONTRAST  
BRIGHTNESS  
COLOR  
0 5 3  
0 5 0  
0 5 0  
0 0 0  
0 5 0  
4 : 3  
SHARPNESS  
HUE  
INPUT TYPE  
INPUT SELECT  
RECALL  
EXIT  
7
 
BRIGHTNESS: Adjusts background black level of the screen image.  
CONTRAST: Adjusts fore ground white level of the screen image.  
H.POSITION: Moves the screen image left or right.  
V.POSITION: Moves the screen up and down.  
PITCH: Adjusts image distortion appearing as vertical bars or noise  
on the screen.  
PHASE: Adjusts image distortion appearing as horizontal noise on  
the screen.  
SHARPNESS: Adjusts clarity and focus of the screen images.  
COLOR TEMPERATURE: Adjusts color temperatures for users.  
LANGUAGE: Allows you to choose among five languages as  
English, Spanish, German, French, Italian  
AUDIO CONTROL: Switch muting ON/OFF and Volume control.  
RECALL: Returns all controls back to factory setting.  
HOT KEY CONTROL  
1. VGA HOT KEY  
UP KEY  
BEIGHTNESS  
CONTRAST  
DOWN KEY  
2. VGA+A HOT KEY  
UP KEY  
VOLUME INCREASE  
VOLUME DECREASE  
DOWN KEY  
8
 
Inputs Diagram  
Inputs  
1
2
3
1. AC POWER INPUT : AC inlet for 110/220V power system  
2. PC IN: This can be connected with the D-Sub15 pin signal connector  
3. LINE IN: This can be connected to the stereo audio out of any sound  
resou  
9
 
Display Angle  
Tilting  
For viewing clarity can tile the LCD forward (up to5 degrees) or  
backward (up to5 degrees).  
Down:5  
Left:40  
Right:40  
Up:15  
10  
 
Product Specification  
Model  
Spec  
PC  
18 active matrix TFT LCD panel  
0.2805(H)x0.2805(V) mm  
1024(H)x768(V)XGA  
LCD Display  
Pixel pitch  
Max Resolution  
Dimensions  
Packing Dimensions  
Contrast Ratio  
Brightness  
140(V)x500(H)x450(L) mm  
220(V)x550(H)x520(L) mm  
350:1  
400:1  
250cd/m2  
500:1  
200cd/m2  
Response Time  
Display Color  
Viewing Angle L/R  
U/D  
15/10ms  
16,777M  
160  
160  
170  
170  
140  
120  
PC Interface Video  
Sync  
RGB analog 0.7Vp p  
Display Mode  
PC connector  
Front Control  
VGA/SVGA/XGA  
15 min D-sub  
Power on/off with LED, Menu select,  
Up/Down Adjustment, Auto tuning, Light sensor  
Contrast, Brightness, Auto tuning, Phase, H-Position,  
V-Position, Input selection  
AC Input:100~240V/1.8A,50-60Hz  
OSD Adjustment  
Power input  
Operating  
Consumption  
Operating  
Conditions  
Storage  
Conditions  
Certification  
Weight  
35W  
Temperature:0 -50  
Humidity: 20%-80%  
Temperature:-20 -60  
Humidity: 20%-80%  
FSS(DOC), CE-B, VCC-I, UL, CSA, TUV/GS  
N/W:7.2Kgs G/W:9.8Kgs  
11  
 
Display Modes  
H Freq(kHz)  
31.469  
31.469  
35.000  
37.861  
37.500  
31.469  
35.156  
37.879  
48.077  
46.875  
49.750  
48.363  
56.476  
58.038  
60.023  
Model  
Resolution  
V Freq(Hz)  
70.087  
59.940  
66.667  
72.809  
75.000  
70.087  
56.250  
60.317  
72.188  
75.000  
74.500  
60.004  
70.069  
71.918  
75.029  
0
1
720*350  
640*480  
640*480  
640*480  
640*480  
720*400  
800*600  
800*600  
800*600  
800*600  
832*624  
1024*768  
1024*768  
1024*768  
1024*768  
2
3
4
5
6
7
8
9
10  
11  
12  
13  
14  
12  
 
Service Information  
Service  
When you buy this excellent LCD Monitor, you are entitle to the  
warranty provide by us, please contact us you need for any information  
or helps of our product.  
Thank you again for buying our products .  
13  
 

QSC Audio Stereo System 522AA User Guide
RCA Cordless Telephone 00004194 User Guide
Rival Frozen Dessert Maker GC8250 I User Guide
Roland Musical Instrument Amplifier KC 880 User Guide
Saeco Coffee Makers Coffeemaker SUP 025 PYR User Guide
Samsung All in One Printer CLX 8385ND Series User Guide
Samsung All in One Printer SL C460FW User Guide
Samsung DVR 460 DX User Guide
Samsung Fax Machine SF4000 User Guide
Sanyo Microwave Oven EM S7595S User Guide